Walk into any reef shop and you'll see the same struggle. Beautiful coral colonies. Healthy fish. And behind the scenes, a saltwater aquarium chiller that's barely keeping up.
The chiller itself isn't the issue. Most units on the market were designed for freshwater, not saltwater. They use copper coils. They use standard-grade stainless steel. They work fine in a planted tank. Put them in a marine system? The corrosion starts within months.
We've seen it dozens of times. A client buys a chiller for aquarium applications, installs it on a marine system, and calls us nine months later: "The temperature is swinging. The unit is still running, but the water won't cool properly."
The cause is almost always the same. Saltwater eats through the wrong metals. The refrigerant leaks slowly. The chiller loses efficiency. Your livestock suffers.
We build saltwater fish tank chillers that don't do that. And we've been doing it long enough to know exactly what works in a marine environment.

A freshwater chiller and a saltwater fish tank chiller look identical on the outside. The difference is invisible—until you look at the parts that touch water.
Component | Freshwater Chiller | Our Saltwater Aquarium Chiller |
Heat exchanger | Copper or stainless 304 | Grade-1 titanium |
Fittings | Brass or plated | PVC or titanium |
Probe housing | Stainless 304 | Titanium or epoxy-coated |
Internal tubing | Copper | Titanium or corrosion-resistant alloy |
Coil thickness | 0.6–0.8mm | 1.0mm (marine-grade) |
Circuit board coating | Standard | Conformal-coated (salt-resistant) |
Why does this matter? In a saltwater aquarium, copper is toxic to invertebrates. Stainless 304 pits. Stainless 316 lasts longer but still corrodes in warm, aerated saltwater. Titanium doesn't. Period.
Every unit we produce uses grade-1 titanium heat exchangers. Zero copper. Zero brass. Zero corrosion points where water meets metal.
[Insert photo: Titanium coil comparison — our coil vs corroded competitor coil, caption: "Grade-1 titanium coil (left) vs corroded stainless coil after 14 months in saltwater (right)"]
Not every saltwater system needs the same cooling capacity. A 40-gallon nano reef runs fine on our AC-080A. A 300-gallon display with metal halide lighting needs a AC-330A running continuously.
Model | HP | Tank Volume (L) | Tank Volume (Gal) | Typical Marine Setup |
080A | 1/13 HP | Up to 80L | Up to 20 gal | Nano reef, desktop frag tank |
100A | 1/10 HP | Up to 160L | 30–40 gal | Standard home reef, small clownfish breeding |
250A | 1/4 HP | 160–350L | 40–90 gal | Mixed reef, medium LPS/SPS display |
330A | 1/3 HP | 350–550L | 90–145 gal | Large reef show tank, heavy lighting load |
500A | 1/2 HP | 550–800L | 145–210 gal | Commercial display, multi-tank systems |
750A | 3/4 HP | 800–1200L | 210–315 gal | Hatchery, public aquarium, grow-out farm |
Need a chiller for a system larger than 1200L? We custom-build up to 5,000L for commercial marine operations.
We're a Guangdong-based production facility that has been building aquarium chillers for over twelve years. Our plant runs dedicated marine cooling lines—not repurposed beverage coolers with aquarium labels.
Titanium heat exchangers – non-negotiable
Copper transfers heat well. It also kills coral. Stainless steel is cheaper. It pits in a saltwater aquarium within 18 months. We use grade-1 titanium on every unit. We've replaced enough corroded coils from other suppliers to know which material lasts in marine environments.
Name-brand compressors only
We build with GMCC, Panasonic, and Hitachi compressors. Not generic equivalents. A saltwater aquarium chiller runs 24/7 during summer months. The compressor takes the heaviest load. We don't compromise there.
Marine-rated controllers
Humidity and salt creep kill standard electronics. We use conformal-coated circuit boards on all controllers. They resist moisture and salt exposure—a detail most suppliers skip.
[Insert photo: Assembly line with AC-330A units, caption: "Marine-grade chiller assembly on our dedicated line"]
[Insert photo: Testing bench with saltwater simulation, caption: "Corrosion testing—titanium coil after 1,000 hours in saltwater"]
We handle private-label saltwater aquarium chillers for brands across the US, UK, Australia, and Europe. If you're launching a marine equipment line, here's what we customize:
What You Change | What We Need From You |
Exterior color and finish | Pantone code or reference sample |
Logo placement | Vector artwork (AI, PDF, EPS) |
Carton packaging | Retail-ready artwork and dimensions |
Controller display language | English, German, French, Spanish, Japanese |
Temperature scale default | °C or °F |
Plug type | US, EU, UK, AU, or custom |
Voltage | 110V, 220-240V, or dual-voltage |
Hose fittings | Metric or imperial threads |
Advanced marine customizations we've delivered:
Epoxy-coated exterior casings for splash-prone installations
Extended titanium coil surface area for high-biomass systems
Custom temperature logic for larval rearing (slow ramp)
Wi-Fi monitoring with remote alerts
Custom firmware for specific temperature probe curves
MOQ for custom branding: 100 units per model.
Trial order: 5–10 units with your branding. Sample cost refunded on full order confirmation.
[Insert photo: Custom-branded unit example, caption: "Private-label saltwater chiller for a US aquarium brand"]
Every buyer asks about price. That's fair. But for a marine system, the purchase price is only the beginning.
Cost Item | Entry-Level Unit | Our Unit |
Unit price | $X | $X + 12–15% |
Titanium coil vs copper/steel | Often copper or 304 stainless | Grade-1 titanium (standard) |
18-month corrosion risk | High | Near zero |
First-year warranty claims | 3–5% | Under 1% |
Salt-damaged electronics | Common | Conformal-coated (standard) |
Return freight for warranty | You pay | We cover |
Replacement part availability | Unknown | 3-year guarantee |
Customer trust | At risk | Stable |
We've seen it repeatedly: a buyer chooses the cheapest saltwater aquarium chiller they can find. Twelve months later, they're replacing it. The total cost—purchase price, shipping, lost livestock, customer refunds—exceeds what they would have paid for a properly built unit.
We don't win on the lowest invoice. We win on the second order, when the first batch is still running with zero corrosion issues.
We don't batch-test marine units. Every chiller that leaves our plant goes through the same 7-step process:
1.
Component traceability – Compressor serial, titanium coil batch, firmware version logged to each unit
Pressure hold test – 2.5 MPa nitrogen pressure for 24 hours; logged with time-stamped photos
Vacuum dehydration – Below 50 Pa for 2 hours to remove all moisture
Refrigerant charge – Weighed, not estimated (documented per unit)
24-hour burn-in – Continuous run at 30°C ambient with temp logging
Final calibration – Probe adjusted against NIST-traceable reference thermometer
Photo record – Internal and external condition before packaging
Each unit ships with its own test summary. If you ask, we send the full log.
Our quality team lead, [Name], has 14 years in refrigeration manufacturing. He personally reviews all marine chiller test reports before shipment.
For more about our manufacturing credentials, visit our About Us page. Our testing protocols reference ASTM B338 standards for titanium heat exchangers.
Detail | Information |
Facility type | Direct manufacturer (not a trading company) |
Location | Shunde City, Guangdong, China |
Founded | 2012 |
Core business | Aquarium-specific refrigeration equipment |
Marine chiller production | Dedicated line with saltwater-grade components |
Production staff | 85 total (assembly, QC, engineering, export support) |
Certifications | ISO 9001:2015,ISO Number]), CE ,RoHS |
Export markets | North America 35%, Europe 30%, Australia 20%, Asia-Pacific 15% |
Annual output | 60,000+ cooling units |
Marine chiller warranty | Titanium coils: 2 years. Compressor/electrical: 1 year. Extendable. |
Private-label capabilities | Full customization for marine brands |
Plant visits: Scheduled tours available. Our facility is 90 minutes from Baiyun International Airport. We provide transportation and translation.
Coral farm, Florida, USA
"We replaced 11 failed chillers across two grow rooms. Our previous supplier had given us compressors that couldn't handle the summer load. We switched to these units 18 months ago. Two failures total—both covered under warranty. The titanium coils are still clean. No pitting. No corrosion." — Edward
Public aquarium, Europe
"Our reef exhibit runs on a 750L system with heavy LED lighting. The water temperature used to fluctuate 2°C daily. That's stressful for the fish and corals. These chillers hold it steady within 0.5°C. We now use them across three other exhibits." — Technical director- Jim
Marine equipment brand, Australia
"We wanted to launch our own line of saltwater chillers. They customized everything—logo, packaging, controller display, even the plug type for our market. After 18 months on the market, our return rate is under 1.5%. That's better than any brand we've competed against." — Steven
Most marine chiller suppliers in China are trading companies. They take orders, forward them to a factory, and collect a margin. We own our production lines. That gives us control over three things:
1. Component-level pricing
You see what each part costs—titanium coil, compressor, controller, casing. No bundled mystery numbers. No hidden commission layers.
2. Marine-specific engineering
We don't adapt freshwater designs for a saltwater aquarium. We build marine units from the ground up with titanium, conformal coatings, and saltwater-rated fittings.
3. Parts availability
We hold titanium coil and compressor stock year-round. When raw material markets tighten, we still ship on schedule. We guarantee parts availability for three years on every active marine model.
Ask ten reef keepers what makes a great saltwater aquarium chiller and you'll get ten answers. For distributors and brand owners, the definition is simpler: it's the one that doesn't come back.
Lowest warranty return rate in its class
Stable temperature control after 12+ months of use
Customers who reorder the same model without calling support
No corrosion complaints from marine tank owners
That's what we build. Not the flashiest feature set. Not the cheapest unit on the market. Just the one that stays in the tank and keeps working—season after season.
Whether you're a distributor, a retail chain, or a private-label brand, the process is the same:
Step | What Happens | Timeframe |
1. Brief | Tell us tank sizes, marine application, volume | Day 1-2 |
2. Proposal | Tiered pricing, sample cost, lead time, shipping | Day 3-5 |
3. Sampling | 1-2 units for testing (or 5-10 for market trials) | 7-10 days to produce |
4. Approval | Test, confirm, request revisions | Varies |
5. Production | Full order through 7-step QC | 15-25 working days |
6. Delivery | Pre-shipment photos, test summaries, shipping | Ongoing |
Total timeline: 8-12 weeks from first inquiry to your warehouse (sampling, production, ocean freight included).
A generic price list won't tell you what your saltwater fish tank chiller will actually cost. Marine systems have different requirements. We quote based on your actual specifications.
What we need from you:
Tank volume (liters or gallons) and livestock type
Estimated first order and annual volume
Any custom branding or packaging requirements
Destination port or warehouse
Certification needs (ETL, UKCA, etc.)
Response: Within 24 hours on working days.
Email: klrheatpump@163.com
WeChat / WhatsApp: +8613424531875
1. How to keep fish tank cool?
A: Our fish tank chiller have high efficieny cooling capacity to cool down fish tank, keep a stable temperature. To support your fish tank business grow.
2. How to cool down a fish tank fast?
A: Our fish tank chiller can cooling fish tank fast as it with high efficiency cooling capacity. It's advanced technology can help save a lot of cost.
3. Do you have any MOQ limited for fish tank chiller order?
A: Sample order can be without MOQ limited, after sample, MOQ will be 20units.