If you're a distributor, installer, or brand owner operating in regions where winter temperatures push heating systems to their limits, you already know the challenge. Conventional heat pumps lose efficiency as the mercury drops. By the time you're dealing with sub-zero conditions, many units are struggling to deliver usable heat.
Our cold climate heat pump solves that problem.
Designed specifically for harsh winter conditions, these units maintain reliable heating performance even when outdoor temperatures plunge to -30°C. The secret lies in advanced compressor technology and intelligent defrosting systems that keep the unit operating efficiently when it matters most.

The market is shifting. Across Europe, North America, and other cold regions, governments are phasing out fossil-fuel boilers to meet decarbonization targets. Heat pumps are emerging as the primary alternative, but the technology must work in real-world conditions – not just laboratory settings.
Industry leaders are investing heavily in cold-climate research. LG, for example, established the Consortium for Advanced Heat Pump Research in Alaska and expanded its network to 12 universities across five countries to develop solutions for extreme conditions. Field testing in locations like Norway and the United States validates performance in actual winter environments.
The results are clear: modern cold climate heat pumps can reduce energy consumption and carbon emissions by 60 to 80 percent compared to electric heaters. For your customers, that translates to real savings and genuine environmental impact.
Need detailed specs for a specific project? Request our datasheet →
Our cold climate heat pump combines proven technology with practical engineering:
Parameter | Specification |
Operating Temperature | Down to -30°C |
COP at -12°C | Up to 2.65 |
COP at -15°C (5°F) | 1.80+ (Exceeds ENERGY STAR requirement of 1.75) |
Heating Capacity Retention | ≥70% of nominal capacity at -15°C |
Noise Level | As low as 38 dB(A) |
Refrigerant | R32 / R290 (low GWP options) |
Compressor | DC Inverter with vapor injection |
Defrosting | ntelligent S.P.D (Self-adapting Pattern Defrost) system |
Power Supply | 220-240V/50Hz/1Ph or 380-415V/50Hz/3Ph |
Certifications | CE, ERP, CB, ISO9001, ISO14001,MCS, KEYMARK, SG READY |
For context, ENERGY STAR cold climate certification requires a COP of at least 1.75 at 5°F (-15°C) and heating capacity of at least 70% of nominal capacity at that temperature. Our units meet and exceed these benchmarks – a fact independently validated through third-party testing.
Learn more about ENERGY STAR cold climate heat pump requirements.
One concern that often comes up with heat pumps is noise – especially in residential areas or noise-sensitive commercial projects.
Our cold climate heat pump operates at sound levels as low as 38 dB(A). To put that in perspective: that's quieter than a library and barely audible in normal conditions. For installers and distributors, this is a major selling point in markets with strict noise regulations or discerning customers.
Sound Source | dB(A) Level |
Our cold climate heat pump | 38 dB(A) |
Library / Quiet office | 40 dB(A) |
Refrigerator hum | 45 dB(A) |
Normal conversation | 60 dB(A) |
Standard heat pump (typical) | 55-65 dB(A) |
We understand that a product is only as good as the support behind it. That's why we've designed our cold climate heat pumps with installation in mind:
Monobloc and split optionsto suit different project requirements
Compatibility with existing heating systems– radiators, underfloor heating, and more
Smart controls (Modbus, Wi-Fi) for remote monitoring and system integration
Professional installation support and comprehensive technical documentation
Goodwarrantywith extended options available
For installers, this means fewer site complications and faster commissioning. For distributors and brand owners, it means a product that creates repeat business rather than service calls.
Want to discuss a specific installation scenario? Speak to our technical team →
As a China-based manufacturer with over 12 years of industry experience, we offer comprehensive OEM and custom services for cold climate heat pumps:
Service | Details |
Private Labeling | Your logo on the unit, packaging, labels, and user manuals |
Custom Specifications | Tailored heating capacities, voltages, and configurations |
Custom Finishes | Colour options and materials to match your brand identity |
Packaging Design | Custom packaging for retail or wholesale distribution |
Flexible MOQ | From sample orders (1-2 units) to full 40ft container shipments (approx. 80-120 units) |
Lead Time | 30-40 days for standard orders, expedited options available |
We operate a modern factory with ISO9001 and ISO14001 certification, automated production lines, and rigorous quality control at every stage – from incoming component inspection to final pre-shipment testing. Our supply chain is vertically integrated, giving us control over component sourcing and production quality.
Our certifications
Certification | Scope |
ISO9001:2015 | Quality Management System |
ISO14001:2015 | Environmental Management System |
CE | European safety and performance standards |
ERP | Energy-related Products Directive compliance |
CB | International product safety certification |
Ready to brand your own cold climate heat pump line? Discuss your OEM requirements →
"We've installed over 500 units of this cold climate heat pump across Sweden and Norway. Even in -25°C conditions, they perform reliably. The noise level is significantly lower than other brands we've tested. Our customers are delighted."
— Anders Larsson, HVAC Distributor, Sweden
"The OEM process was smooth and professional. The factory accommodated our custom colour and branding requirements with no delays. We're now stocking their cold climate heat pumps as our premium winter solution."
— Michael Chen, Brand Owner, Canada
"Technical support is responsive and knowledgeable. When we encountered an unusual installation scenario, their engineering team provided a solution within 24 hours."
— Sarah Mitchell, Commercial Installer, UK
Cold climate heat pumps are proving their worth across diverse applications:
Sector | Applications |
Residential New Builds | Achieving near-zero-energy standards |
Residential Retrofit | Replacing gas or oil boilers in existing homes |
Commercial Buildings | Schools, hospitals, offices, apartment blocks |
Agricultural | Greenhouses, poultry farming, livestock heating |
Industrial Process | Low-temperature process heating |
Export markets we currently serve:
* Germany
*United Kingdom
*France
*Netherlands
*Poland
*Sweden
*Norway
*Denmark
*Canada
*United States
Our cold climate heat pump operates reliably down to -30°C ambient temperature. Even at -15°C (5°F), it maintains over 70% of its nominal heating capacity, exceeding ENERGY STAR cold climate certification requirements.
Standard heat pumps typically lose significant heating capacity below -10°C and may shut down entirely at -15°C. Our cold climate heat pump uses vapor injection compression (also known as EVI – Enhanced Vapor Injection) and intelligent defrosting to maintain high performance in sub-zero conditions. This is the key differentiator that makes cold-climate operation possible.
At -12°C ambient temperature, our unit achieves a COP of up to 2.65. This means for every 1 kW of electricity consumed, the system delivers approximately 2.65 kW of heat – substantially more efficient than electric resistance heating.
Yes. As an OEM manufacturer, we offer full private labeling and custom finishes. You can choose the unit colour, add your logo and branding, and customize packaging and documentation. Minimum order quantities for custom branding start from as low as 50 units.
Absolutely. We offer sample orders (1-2 units) for evaluation, testing, and certification purposes. This allows you to validate performance in your local market conditions before committing to larger orders.
Standard production lead time is 30-40 days from order confirmation for full container orders. Sample orders can be shipped within 7-10 daysif have stock. We can accommodate expedited requests for urgent projects.
Our cold climate heat pumps are certified to CE, ERP, CB, ISO9001, and ISO14001 standards. We can also work with you to meet specific market requirements (e.g., UKCA, SASO for Middle East markets).
Yes. We provide comprehensive installation manuals, wiring diagrams, maintenance guides, and technical support via email, phone, and video call. Our technical team is available for consultation throughout your project.
To ensure your cold climate heat pump delivers optimal performance over its lifespan:
Task | Frequency
|
Clean or replace air filters | Every 3 months |
Inspect outdoor unit for debris/ice buildup | Monthly (winter) |
Check refrigerant charge levels | Annually |
Verify electrical connections | Annually |
Test defrost cycle operation | Before winter season |
Professional full system inspection | Every 2 years |
We're looking for distributors, installers, brand owners, wholesalers, and system integrators who understand the value of reliable, efficient, and quiet cold-climate heating.
We offer:
✅ High-quality products with third-party validation
✅ OEM and custom solutions with low MOQ
✅ Factory-direct pricing and full export support
✅ Responsive technical service and after-sales support
✅ Good warranty with optional extensions
Get started today:
Your Need→Contact
Request product specifications →Download datasheet
Discuss custom OEM requirements →Speak to our OEM team
Order a sample unit →Request a sample
Get bulk pricing →Request a quote
Email: klrheatpump@163.com
We respond to all inquiries within 24 hours.
Factor | Our Advantage |
Experience | 20+ years in heat pump manufacturing |
Quality | ISO9001, ISO14001, CE, ERP, CB certified |
Capacity | 50,000+ units annual production |
Customization | Full OEM service with low MOQ |
Support | Technical and after-sales support team |
Track Record | Exporting to 30+ countries worldwide |