Let's be honest – the HVAC market is crowded, and finding a central heat pump partner who actually understands your business isn't always easy. That's why we've built our entire operation around one simple idea: your success drives ours.
We're a manufacturer and exporter that doesn't believe in one-size-fits-all. Whether you're a distributor stocking inventory, an installer looking for reliable equipment your crew can fit quickly, or a brand owner wanting to launch your own line of central heat pumps, we've got the experience and flexibility to make it happen. We've been doing this long enough to know that every market has its quirks, and every partner has their own way of doing things.
Our factory floor is where that flexibility comes to life. We don't just assemble units – we engineer them from the ground up, with custom configurations that reflect your specific needs. Need a different refrigerant? Want your own control logic? Prefer a certain casing finish? We handle it all, so you get a central heat pump that truly carries your identity, not ours.

We've all seen spec sheets that look great but don't translate to real-world performance. That's why every unit that leaves our factory goes through exhaustive testing in our nationally certified performance center – not spot checks, but actual, thorough validation of every single unit.
Our high quality standards aren't just marketing language. They're backed by ISO9001, ISO14001, ISO45001, plus CRAA Product Certification and China Energy Saving Product Certification. We've invested heavily in these accreditations because our partners – and their customers – deserve that peace of mind.
The bottom line? When you spec one of our central heat pumps, you're not rolling the dice. You're getting decades of engineering refinement in a package that'll keep performing long after the installation crew has moved on.
Here's what we hear from our partners all the time: "My customers don't care about efficiency numbers – they care about their electricity bills." We get it.
Our central heat pump systems are built around energy efficient design principles that translate directly into lower operating costs. The inverter technology we use continuously adjusts output to match real-time demand, so the system isn't running at full blast when it doesn't need to. Intelligent control algorithms fine-tune performance on the fly. The result? Comfort stays consistent, but energy waste drops significantly.
And with environmental regulations tightening across Europe, North America, and beyond, offering genuinely energy efficient equipment isn't just good for your customers – it's becoming a competitive necessity.
We offer both R32 and R290 central heat pump lines, and we honestly believe there's a place for each. The right choice depends entirely on your target applications, installation environments, and the specific demands of your customers.
Feature | R32 Central Heat Pump | R290 Central Heat Pump |
Efficiency (COP) | Up to 4.28 | Up to 4.38 – slightly better, especially at higher temps |
Flow Temperature | Optimized up to 55°C – great for underfloor systems | Handles up to 75°C – perfect for radiator-based retrofits |
Environmental Impact | Moderate GWP | Ultra-low GWP – about as green as it gets |
Installation Flexibility | Standard clearances, fits most plant rooms | Needs a bit more breathing room; best for outdoor or open installations |
Ideal Applications | New builds, underfloor heating, efficiency-focused upgrades | Older buildings, radiator systems, high-temperature replacement projects |
R32 models are our workhorses – versatile, efficient, and easy to install. They're what we typically recommend for residential and light commercial projects where installation space isn't a major constraint.
R290 is where we see the future heading. With near-zero GWP, these units are already winning over customers who prioritize sustainability credentials. And that 75°C flow temperature? It's a game-changer for retrofitting older buildings with existing radiator systems, where lower-temperature heat pumps just don't cut it.
Full OEM – Your Brand, Our Production
When you come to us as an OEM partner, we treat your product like it's our own – because, in a way, it is. We handle the entire manufacturing process from component sourcing through to final assembly and packaging. You get a finished central heat pump ready for your branding, your packaging, and your distribution network.
We've been an OEM manufacturer for some of the biggest names in the industry, and we understand what that level of responsibility requires. Consistency, quality, and on-time delivery aren't negotiable – they're the baseline.
If you're looking for something truly unique, our custom and customized capabilities go far deeper than sticking your badge on a standard unit:
Custom casing– Choose finishes, colors, and design language that align with your brand identity
Custom controls– Integrate your preferred controllers, IoT protocols, or building management systems
Custom capacity– Tailor heating outputs and hydraulic configurations to match regional standards
Custom packaging– Designed specifically for your logistics channels, whether that's palletized containers or single-unit shipments for high-end retail
The goal is simple: when your customers see the unit, they should see your brand, not a generic product with a different label.
For distributors and brand owners who want to expand their portfolio but aren't ready to invest in manufacturing infrastructure, our private label model offers a rapid, cost-effective alternative. We protect your brand exclusivity in your target markets, and we stay involved with technical support throughout the product lifecycle – so you're never left figuring things out on your own.
Let's be upfront about this – we don't sell to end users. We're a B2B manufacturer through and through, and we've structured our entire operation to support partners who sell, install, and integrate our equipment.
Distributors– You need reliable stock, competitive pricing, and technical backup for your installer network. We deliver all three.
Installers & Contractors– You need equipment that's straightforward to install, with solid documentation and responsive support when things get complicated. We've built our systems with field crews in mind.
Brand Owners – You want to launch a heat pump line without the overhead of running a factory. We handle production; you handle marketing, sales, and brand building.
System Integrators– You're incorporating our units into larger energy management solutions. Our control protocols are flexible and well-documented.
We never compete with our own partners by selling direct. Your market is your market.
Walk through our factory, and you'll see a production environment that balances high-volume capability with exacting quality control. Our R&D team holds multiple national invention and utility model patents, and they're constantly refining our designs for quieter operation, better efficiency, and longer service life.
We're not a fly-by-night operation. We've been at this for years, and our continuous investment in production technology reflects our long-term commitment to the HVAC industry.
As an exporter with shipments to over 40 countries, we've learned a thing or two about international logistics. We understand the paperwork, the customs requirements, and the shipping quirks that can trip up less experienced exporters. Whether your order moves by container ship or urgent air freight, our logistics team coordinates every detail to ensure your stock arrives when and where you need it.
Our network of suppliers includes some of the most reputable component manufacturers in the world. From compressors and heat exchangers to electronic controls and refrigerant systems, we source only from suppliers who meet our stringent quality criteria. That consistency is what allows us to maintain our high quality standards across thousands of units.
Parameter | R32 Series | R290 Series |
Heating Capacity
| 5 – 20 kW | 5 – 20 kW |
Flow Temperature | Up to 55°C | Up to 75°C |
Operating Range | -25°C to +43°C | -25°C to +43°C |
COP (at A7/W35)
| Up to 4.28 | Up to 4.38 |
Refrigerant
| R32 | R290 |
Noise Level | From 47 dB(A) | From 47 dB(A) |
Certifications
| CE, CB, ERP A+++, Energy Saving | CE, CB, ERP A+++, Energy Saving |
We're always looking for new partners who share our commitment to quality and customer service. If you're a distributor, installer, brand owner, or system integrator looking for a central heat pump manufacturer that genuinely cares about your success, we'd love to hear from you.
Tell us about your market, your volume requirements, and any custom features you're considering. We'll work up a proposal that makes commercial sense and helps you grow your business.
And if you're already working with another OEM and wondering if there's a better option out there – let's have that conversation too. Sometimes a fresh perspective (and a more flexible factory) is exactly what you need.
Please contact us for get the wholesale quote!